40dBm 4G LTE 2600MHz Mobile Phone Signal Repeater Single Band 10W
with High Gain
4G LTE 2600MHz Repeater Description:
A professional LTE signal repeater will effectively eliminate the
signal blind areas, enhance the network quality, improve the image
of cellular operators and bring them more profit, and easy to
install and small footprint with no need for expensive transmission
lines.
The Single-Band RF Repeater is the kind of repeater used most
frequently. It has a simple structure to transparently convey and
amplify the wireless signal (at the same frequency) between the BTS
(Base Transceiver Station) and mobiles in single wireless network.
The Single-Band RF Repeater is working as a relay between the BTS
and mobiles.
It picks up the signal from the BTS via the Donor Antenna, linearly
amplifies the signal and then retransmits it via the Coverage
Antenna (or the Indoor Signal Distribution System) to the
weak/blind coverage area. And the mobile signal is also amplified
and retransmitted to the BTS via the opposite direction.
As per operator’s requirement for working frequency, two types of
Single-Band RFR are available:
1. Band-Selective Single-Band RF Repeater: to amplify all signals
in the whole band (bandwidth is customized);
2. Channel-Selective Single-Band RF Repeater: to amplify only the
signals transmitted in the customized 1/2/4/8/16 channels.
4G LTE 2600MHz Repeater Features:
· Aluminum-alloy casing has high resistance to dust, water and
corroding;
· AGC (automatic gain control) function to prevent
self-oscillation;
· Highly selective channel selector can process multiple channels
simultaneously;
· No interference to BTS by adopting linear amplifier with high
gain and low noise;
· Adopting filter with highly selectivity and low insertion loss
eliminates interference between uplink and downlink;
4G LTE 2600MHz Repeater Application:
To expand signal coverage or fill signal blind area where signal is
weak or unavailable.
· Outdoor: Airports, tourism regions, golf courses, tunnels,
factories, mining districts, villages, highways…
· Indoor: Hotels, exhibition centers, basements, shopping malls,
offices, parking lots.
The Repeater is mainly applicable to such case:
· The repeater can find an installation place which can receive
pure BTS signal at strong enough level and can meet the requirement
of isolation to avoid self-oscillation;
In comparison with FSR (frequency shift repeater) and FOR (fiber
optic repeater), the RFR has the following benefits and
disadvantages:
Pro | Con |
· Easy to build the installation site; · Lower cost of equipment and site-building. | · Inappropriate installation may cause self-oscillation; · The Coverage Antenna shall face against the Donor Antenna, which
limits the coverage angle; · · High signal noise may be introduced since the Donor Antenna picks
up signal from the air; · The repeater shall be installed within the coverage of BTS. |
4G LTE 2600MHz Repeater Specification:
Working Frequency (customizable) | Uplink | 2500 - 2570MHz |
Downlink | 2620 - 2690MHz |
Working Bandwidth | Customizable |
Max. Input Level (Non-Destructive) | -10dBm |
Output Power (customizable) | 40dBm (10 W) |
Gain | ≥ 90dB |
Gain Adjustment Range | 1~31 dB @ step of 1dB |
AGC (Automatic Gain Control) /
ALC (Automatic Level Control) | >20dB |
Voltage Standing Wave Ratio (VSWR) | < 1.5 |
Noise Figure | ≤ 5dB |
In-Band Ripple | ≤ 3dB |
Frequency Error | ≤ 0.05ppm |
Spurious Emission | Within working band | ≤ -15dBm/30kHz |
Out of working band
(Δf > 2.5MHz) | 9kHz~1GHz: ≤ -36dBm/30kHz |
1GHz~12.75GHz: ≤ -30dBm/30kHz |
Third-Order Intermodulation | ≤ -45dBc/30kHz (measured under rated output power) |
System Delay | ≤ 5.0μSec |
I/O Impedance | 50Ω |
RF Connector | N-Type (Female) |
Temperature Range | Operation: -25°C ~ +55°C / Storage: -30°C ~ +60°C |
Relative Humidity Range | ≤ 95% (non condensing) |
Power Supply (customizable) | DC 48V / AC 85V - 265V, 45Hz - 65Hz |
Power Consumption | ≤200W |
Backup Power Supply (optional) | 4 hours |
Casing Level | IP65 |
Dimensions(cm) | 75x50x32 |
Weight(kg) | ≤19 |
